Description
Easily add an aftermarket amplifier to your vehicle’s factory audio system with the LocPRO Advanced 4-Channel Active Line Output Converter with Auto Turn-On by PAC. The LPA-2.4 converts speaker-level (high-level) audio signals to RCA preamp (low-level) signals so you can install an aftermarket amplifier without replacing your factory radio. This four-channel active line output converter can also be used to retain your vehicle’s OEM amplified audio system when replacing your factory radio.
Compatible with most vehicles’ OEM audio systems
For use when adding aftermarket amplifiers to car audio systems without RCA preamp outputs or when replacing your vehicle’s factory radio and retaining the factory amplified audio system.
4-channel interface
Features two inputs and four outputs for integration with your existing audio system.
Auto turn-on mode selection
Choose between remote wire input or DC offset (3V – 7V turn on trigger) to automatically power the amplifier when the radio is turned on.
Dual variable stereo gain control with clipping indicator
Allows you to adjust the output signal from -28dB to +1dB and indicates signal clipping when gain is set to high.
Selectable on-board load resistors
Including 20 ohms, 60 ohms, and 20k ohms impedance for newer factory-amplified vehicles.
400W (40V) peak power input per channel @ 20k ohms
For high-quality sound.
9.5V (RMS) maximum output voltage @ 13.8V
For efficient operation.
Selectable ground isolation
Choose from common, ISO (default), or 200 ohms.
10Hz – 20kHz frequency response
Ensures faithful sound reproduction.
110dBA signal-to-noise ratio @ 6.4V output
Enjoy crisp audio.
<0.01% Total Harmonic Distortion (THD)
For clean sound.
For clean sound.
Up to 12dB bass boost (CH 3-4)
Customize your bass using the optional LPA-REM remote controller (sold separately).
<250Hz low-pass filter (CH 3-4)
Ensures flexible operation.
Ensures flexible operation.
18AWG removable quick-connect with screw-type terminal
Provides secure connections.
Stamped steel chassis and housing
Enables increased heat dispersion and durability.
Specifications
Key Specs
- Maximum Power Handling: 400 watts
- Number Of Channels: 4
- Signal-to-Noise Ratio (SNR): 110 decibels
- Color: Black
General
- Product Name: LocPRO Advanced 4-Channel Active Line Output Converter with Auto Turn-On
- Brand: PAC
- Vehicle Compatibility: Universal
- Model Number: LPA-2.4
- Color Category: Black
Dimension
- Product Height: 0.91 inches
- Product Length: 2.99 inches
- Product Width: 4.74 inches
- Product Weight: 1.67 pounds
Features
- Output Level Control: Adjustable
- Number Of RCA Outputs: 4
- Maximum Input Voltage: 40 volts
- Minimum Frequency Response: 10 hertz
- Maximum Frequency Response: 20 kilohertz
- Input(s): Speaker Wire
- Output(s): RCA
Warranty
- Manufacturer’s Warranty – Parts: 1 year
- Manufacturer’s Warranty – Labor: None
Specifications
- UPC: 609098834803
Specifications
| Package Weight | 2.67 lbs |
|---|---|
| Brand | PAC |
| Model | LPA-2.4 |
| UPC | 609098834803 |
| Color | Black |
| Product Width | 4.74 in |
| Product Height | 0.91 in |
| Product Length | 2.99 in |
| Product Weight | 1.67 lb |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.